Thursday, January 24, 2013

cognex dvt515

anritsu cma5 Light Source Optical Power Meter

Anritsu CMA5 L2-35 Singlemode Fiber Optic Light Source CMA 5 L235 5L35

Singlemode 1310nm 1550nm

Anritsu CMA5 - L2-35 Light Source
Light Source: The CMA5 Series Light Sources provide an economical and stable laser source for use in point-to-point attenuation measurement. They feature a rugged design, built to withstand the difficult testing environment of fiber optic cable installation and maintenance.
The CMA5 L2-35 Light Sources are ideal for testing single-mode fibers as they are offered in a variety of wavelengths to meet testing applications for WDM with 1310/1550 nm wavelength.

Specifications:

Model/Order No.	L2-35
Emitter Type	LD
Wavelength	1310/1550 �20 nm
Output Power	�7 dBm (SM fiber)
Source Line Width (FWHM)	<5 nm="" td="">
Modulation Output	CW, 270 Hz, 1 kHz, 2 kHz
Stability (8 hours)	�0.1 dB (25癈)
Connector Type	FC, ST, SC (User replaceable)
Battery Operation Time	16 h (9 V alkaline battery)
Input Power	9 V (9 V alkaline battery)
Operating Temperature Range	�10� to +50癈
Storage Temperature Range	�25� to +60癈
Relative Humidity	0 to 95% (no condensation)
Dimensions	75 (W) � 145 (H) � 25 (D) mm (excl. rubber cover)
Mass	250 g
Laser Safety	IEC 60825-1: 2007 CLASS 1 21CFR 1040.10 Excludes deviations caused by conformance to Laser Notice No. 50 dated June 24, 2007
EMC	EN61326-1, EN61000-3-2

Anritsu CMA5 Optical Power Meter

*Click image(s) below to enlarge.*
Handheld Optical Power meter Available For Rental or Purchase DESCRIPTION Pocket-sized and rugged design Large LCD display Accurate Easy to use Three-year warranty Dual-way powering system including a 9V battery and an optional power adapter Great for attenuation and power throughput measurements on point-to-point fiber optic links No warm up time Fast response time Auto-zeroing capabilities and tone detection Multiple calibration wavelengths to address all network types: datacom, multimedia, WDM as well as FTTx High input power capacity enables optical amplifier characterization and multimedia/CATV measurements Ideal for testing single-mode and multimode fibers in various types of applications, thanks to multiple wavelength calibration at 850/1300 nm for datacom testing needs, 1310/1550/1625 nm for all WDM testing, as well as 1490 nm for FTTx testing needs http://velcom-t.ru/fulldiscription/AnritsuCMA5_E1500.pdf

ola-15

Wednesday, January 23, 2013

andrew T-25-NM DC-3Ghz 25w dummy load

Tuesday, January 22, 2013

symmetrico 58532A GPS L1 Reference Antenna

ELECTRICAL SPECIFICATIONS
Frequency Range (3 dB Bandwidth): 1575.42 MHz ±10 MHz (typical)
Polarization: Right hand circular
Output Impedance: 50 Ω (typical)
Total Gain: >30 dBi (38 dBi typical @ elevation angle 90°)
Out-of-Band Signal Attenuation: 60 dB (typical) at 1575.42 MHz ±50 MHz
Noise Figure: <2 .2="" br="" db="" typical="">VSWR: <2 .5="" br="" typical="">DC Power: 5 VDC ±0.5 VDC, <27 ma="" p="" typical="">

http://www.symmetricom.com/products/gps-solutions/gps-timing-products-and-accessories/58532A-GPS-L1-Reference-Antenna/

----------------------

This is ONLY the used working gps antenna ONLY

NO Mounting hardware come with.

ONLY the gps antenna you will get.

check aboved link for spec

--------------

This is good antenna/ these not available from last 2 years ago(sold 40 psc last time.Now this time only 30 psc/good luck!

------------

shipping

us-15-20 days

other where