Matco Tools OBDII/EOBD & CAN Scan Tool CAN400

OBDII / EOBD & CAN SCAN TOOL
Compatible with all 1996 and newer vehicles (OBDII & CAN)
Read and display LIVE sensor data
Displays over 15,000 generic and manufacturer specific definitions
Displays all modes of OBDII data including O2 Monitor, Diagnostic Monitor Test and On Board Systems
Free updates




Live Data allows the user to view vehicle sensor, switch and relay inputs in real time, while the engine is running. This information helps pinpoint the problem components for a faster diagnosis.
Displays generic and enhanced definitions on screen, State OBD check, OBDII Drive Cycle Mode and displays all 9 modes of OBDII data and meets European OBD standards.
Read and display freeze frame data (snap-shot of vehicle data at the time of the fault)
Read and display: MIL status,I/M monitors (emissions), pending DTC's,VIN number, CVN and Cal ID, O2 Monitor Test, Diagnostic Monitor Test, On Board Systems
Read and erase diagnostic trouble codes
OBDII information available: Read and display LIVE sensor data
Additional Features: Over 15,000 code definitions, Field updateable via USB port, EOBD compatible, CE certification and Trilingual menu, manual and definitions (English, Spanish, French)

http://matcotools.com/catalog/diagnostic-tools/diagnostic-scan-tools/page-8/

SPX OTC Mac tools Accuracy Plus Battery Tester Charging Analyzer

Checks the battery, starter, voltage regulator, alternator and diodes
Features interactive system diagnostics which applies a load to the battery and vehicle''s electrical system
It can monitor the charging system behavior under load and no-load conditions
It relies on internal circuitry, not the vehicle''s accessories or the technician to load the electrical system during testing, which makes test results accurate and repeatable from test to test, vehicle to vehicle
It accurately tests the battery and starting/charging system in just 40 seconds
It has an internal battery so it can test batteries down to a zero state of charge. It makes "good/bad" diagnostic decisions on discharged batteries without charging them first
Load test technology is less sensitive to connections and side terminal batteries than conductance-type testers making in-vehicle testing more reliable with this tool
Users can see a state-of-charge reading so they know exactly how long to charge the battery to bring it to a full state of charge
Selectable battery ratings for cold cranking amps, cranking amps and amp hours. Test range: 50 to 2,000 CCA, 1.0 to 14 volts
It will even accurately test the new acid flooded type batteries
2-line, 16-character display is easy to read even under difficult lighting conditions

--------------
some useing review and guide

http://www.autorepairfacts.com/electrical/battery-starter-and-alternator-testing/

=================

Actron CP9410 PocketScan Plus Diagnostic Code Reader for OBDII

These Actron PocketScan Plus code readers feature new urgency indicators to tell how vital the check engine light problem may be to a vehicle's drivability. In addition to the emissions and MIL status features, they also offer access to dynamic web support information, which includes common components, possible symptoms, and common causes related to trouble codes.

Additional features include:

* Compatible with all 1996 and later vehicles
* Read and display diagnostic generic trouble codes
* Erase trouble codes and turn off the check engine light
* Auto-Link (automatically links to vehicle computer when connected to vehicle port)
* Optional battery feature allows user to retain and review information, even if not connected to vehicle
* Summary screen displays number of codes found
* Backlit display--easy to read anywhere
* Toll-free telephone and web customer support
* Made in USA with globally sourced components
* Internet upgradeable via USB port when applicable
=======================================================

Matco MPS700 OBDII & ABS Scan Tool

OBD II & ABS SCAN TOOL
Displays CodeConnect "Top Reported Fixes"
Compatible with all 1996 and newer vehicles (OBDII & CAN)
Record and playback LIVE engine data
Enhanced data request for GM, Ford, Chrysler and Toyota vehicles.
ABS code read/erase capability for most 1996 and newer GM, Ford and Chrysler vehicles
Displays all modes of OBDII data including O2 Monitor, Diagnostic Monitor Test and On Board Systems
Graph Live Data and playback recorded data.
Displays all 9 modes of LIVE data
Free Updates
Supports multiple trouble code requests, generic codes, pending codes and enhanced codes
I/M Readiness Monitors, MIL status, Record and playback data, Freeze frame data and State OBD Check
EOBD compatible (European On Board Diagnostics) and CE certification
2010 MY coverage for light and medium trucks, Hybrid and Diesel vehicles.
Read and display VIN#, CVN, Cal ID, and IPT, O2 Monitor Test, Diagnostic Monitor Test and On Board systems
Dynamic language switching (English, Spanish, and French)
Print Data to PC, On tool Code Lookup Library and Visual indicator when communicating with vehicle.

http://matcotools.com/catalog/diagnostic-tools/diagnostic-scan-tools/page-9/

Actron CP9580 AutoScanner Plus OBD II, CAN & ABS Scan Tool

The Actron CP9580 AutoScanner Plus OBD II, CAN & ABS Scan Tool is the ultimate choice in handheld automotive diagnostic scan tools, suitable both for advanced automotive do-it-yourselfers (DIYers) and automotive professionals alike. Not only does it capture and analyze data like other scan tools, but it also can help you prioritize troubleshooting with access to the most probable solution based on top reported fixes specific to the vehicle's make, model, year and engine. Additional features include live engine data, graph live data, freeze frame data, drive cycle mode, print functionality and much more.


The Advanced Handheld Scanner That Troubleshoots for You
Since the 1980's standardized Onboard Diagnostic systems—first OBD-I and currently OBD-II—mandated for virtually all cars and light trucks manufactured for the US market have provided automotive technicians, and increasingly DIYers, with insight into the increasingly complex inner workings of modern passenger vehicles. Traditionally professional grade diagnostic results required large and/or expensive scanning tools to translate diagnostic trouble codes (DTCs) and other data generated by the internal computer networks of your vehicle when the check engine/malfunction indicator light (MIL) on the dashboard goes off, but now there is a much better way; the Actron CP9580 AutoScanner Plus Scan Tool.

Generic and manufacturer codes an definition.
View larger.

Onboard code troubleshooting with CodeConnect.
View larger.

The new CP9580 AutoScanner Plus with CodeConnect does way more than just displaying the trouble codes and definitions seen in other handheld scan tools. At the touch of a button it can also actually help prioritize troubleshooting using the top reported fixes related to these codes, specific to your vehicle's make, model, year and engine. Once codes register on the device, AutoScanner Plus indicates on screen which codes have the CodeConnect details available. To gain access to these possible fixes all the user need do is push the CodeConnect button in the middle of the keypad and the most probable solutions according to the data of file will be displayed. CodeConnect is a comprehensive database of 3 million ASE verified fixes for the trouble codes that cause the check engine light to illuminate, providing a shortcut for troubleshooting efforts. Advanced functionality built into AutoScanner Plus also includes advanced domestic ABS code coverage, allowing read/erase capability for most 1996 and newer GM, Ford and Chrysler vehicles (click to see an ABS compatibility chart). And additional features include live engine data, graph live data, freeze frame data, drive cycle mode, field updateable via USB port, print functionality and much more.

Standard Features:
General features
CodeConnect technology for up to 3 million possible fixes.*
Record and playback LIVE engine data
Display live real time data.
ABS code read/erase capability for most 1996 and newer GM, Ford and Chrysler vehicles (see compatibility).
Custom data list for live data.
Graph live data.
Displays all 9 modes of global OBD-II data.
Displays enhanced code definitions on screen.
Hardware features
Optional battery power (as well as directly through the OBD-II connector).
Field updateable via USB port.
Trilingual manual (English, Spanish, and French).
Print data to PC.
Software features
Read and erase DTCs.
Compatible with OBD-II and CAN vehicles 1996 and newer.
OBD-II generic and manufacturer specific code definitions.
Read and display MIL status.
Read and display I/M monitors.
Visual indicator when communicating with vehicle.
Pending DTCs.
Freeze frame data.
Drive cycle mode.
State OBD check.
Code lookup library.
Trilingual menus and definitions.*

Actron CP9185 Elite AutoScanner Diagnostic Code Scanner

Actron CP9185 Elite AutoScanner Diagnostic Code Scanner


The CP9185 Elite Autoscanner from Actron, a leading manufacturer of automotive diagnostic tools, has the upgrades customers asked for. This feature packed unit offers DIYers and technicians the ability to read enhanced codes, graph engine data, record and playback live diagnostic information and the ability to print through a PC. The CP9185 is compatible with all 1996 and newer OBD II (On-Board Diagnosis II) compliant vehicles manufactured in North America, Asia and Europe and (with the purchase of optional cables) will cover most OBD I domestic vehicles. The unit is fully updateable, and can accomodate future vehicles, via the internet. The large easy-to-read liquid crystal display makes reading those diagnostic trouble codes and their descriptions a breeze. The scanner, with its patented technology, provides
The Actron CP9185
easily scans and retrieves DTCs.
View Larger

more functions than any other handheld diagnostic scanner at a comparable price on the market today.
The Actron CP9185
easily scans and retrieves DTCs.
View Larger


While robust enough for professional technicians, the CP9185 is simple and easy to use. Just plug the scan tool into your cars data link connector (DLC), located in the drivers compartment, and let the unit do the rest. The extremely user friendly menu makes getting the information you need a snap. This code reader from Actron reads, displays and erases generic OBD II and manufacturer specific codes while reseting your check engine light.

Money-saving Monitor
It has been determined that a problem with you emission control system can affect your cars overall performance and fuel efficiency. The CP9185 gives you the ability to diagnose your cars problem in a few easy steps, giving you the option of fixing it yourself or finding the best repair price possible. Monitoring your vehicle's system can reduce your operating and maintenance costs while keeping you safe on the road, making the versatile CP9185 Elite Autoscanner from Actron a great investment.

Actron CP9550 Pocket Scan Plus OBD II and CAN Code Reader

The Actron CP9550 OBD-II PocketScan Plus is the most advanced, powerful and compact automotive diagnostic trouble code (DTCs) reader available, but DTC's and descriptions are just a start of the tasks it can handle. The CP9550 PocketScan is CAN (controller area network) compliant and provides freeze frame data, VIN info and performs the important task of (I/M) Inspection Maintenance-readiness testing by displaying the I/M readiness monitor status. Great for use before and after repairs are made, its small size makes it perfect for easy storage and use.


Advanced and Compact OBD-II Diagnostics
Since the 1980's standardized Onboard Diagnostic systems—first OBD-I and currently OBD-II—mandated for virtually all cars and light trucks have provided automotive technicians with insight into the increasingly complex inner workings of modern passenger vehicles. On the other hand, most consumers are totally unaware of these systems, with the only indication that there may be a problem with their vehicle coming to their attention when "check engine"/malfunction indicator light (MIL) is illuminated on the dashboard. Professional technicians utilize large, expensive diagnostic tools to translate the diagnostic trouble codes (DTCs) generated by the internal computer networks of in your vehicle in these events. The cost for this is passed on to you by your mechanic whether you understand the reason/mechanism or not, but entry-level do-it-yourselfers (DIY) do not have to be left in the dark.

Codes and definition on-screen.
View larger.

Additional, affordable, advanced info in-hand.
View larger.

With Actron's CP9550 OBD-II PocketScan Plus DIYers can instantly and inexpensively gain access to the generic OBD-II codes generated by their vehicles that indicate a vast amount of valuable diagnostic information. These generic codes can be read easily with the patented one-touch read and erase buttons both during normal use parameters of their vehicle and in the event of an MIL event, with their definitions available on-screen. Designed for ease of use, the CP9550 is CAN compliant (an important OBD-II computer protocol), utilizes a standard 16-pin OBD-II connector and features a cable permanently connected to the unit. CAN functionality allows the CP9550 to interact with the different diagnostic subsystems within your vehicle. The standard pin layout and permanent orientation of the cable ensures that you will always be able connect to your vehicle's data link connector (DLC), the OBD-II input port usually located underneath your dashboard, and the unit's rugged construction and small size mean that it can be stored and taken anywhere. In addition to code reading the Actron CP9550 also provides access to more advanced vehicle information. These include the reading and display of "freeze frame" data, which is a snapshot of the overall sensor readings from your vehicle's central computer at the time of a MIL event; access to the VIN (vehicle ID number); and the status of your vehicle's inspection and maintenance (I/M) monitors, whose proper working is pivotal to a vehicle passing state mandated emissions tests.

Standard Features:
Compatible with ALL 1996 and newer vehicles (OBD-II & CAN).
Automatically reads DTCs when connected for fast diagnostics.
Displays OBD-II generic code definitions.
Reads, displays and erases DTCs.
Reads and displays MIL (malfunction indicator light) status.
Reads and displays I/M monitors.
Reads and displays pending codes.
Reads and displays freeze frame data.
Reads and displays VIN (easy way to check vehicle ID number).
Easy to read backlit display.
Effortlessly powered by car battery through the 16-pin OBD-II connector.