-
| Measurement made easy | ||
| Measurement is made easy by an auto-close function which automatically finishes measuring when it is returned to the starting point during measurement. | ||
 |
Measure by measure | |
| Units such as mm, cm, m, km, a, ha, in, ft, yd, mile and ac are already provided. Other units can be calculated using the calculator function. Also, if the measured value overflows, the Super PLANIX automatically shifts one digit upwards. | ||
|
Two modes are better than one | |
| The area and line length of complex diagrams can be easily and rapidly obtained by Point mode measurement for plotting points on straight lines and Stream mode for tracing curves on curved lines. | ||
|
Another bright idea from PLANIX |  |
| The tracer lens is designed to be bright in order to make most materials easy to measure. | ||
| Tracer arm controls rotate for convenient right-or left-handed operation | ||
|
Give your computer a rest | |
| The Super PLANIX are designed with an RS-232C interface for connection to a computer. With the appropriate computer hardware configurations and Cables, you can send any measured data to your supplied software. Just push the ENTER key and the measurement is transferred. | ||
|
Get it in writing | |
| One Super PLANIX model comes with a built-in Thermal printer for immediate hard copy of your measurements. This way, you have a permanent record of your important computations. If your work does not require this feature, there is also a model without it. | ||
The Super PLANIX BETA can simultaneously obtain with a single tracing and at high precision Area, Line Lengths(circumferences), Side Lengths and Coordinates.
13580417781 出售 HP Agilent 8766k 26.ghz SP3T Coaxial Switch    Agilent 8766k Multiport Coaxial Switch, DC to 26.5 GHz, SP3T------------list price 1100 USD ---------------
13580417781 出售 trimble zephyr L1/L2 Gps antenna for sell    Dual frequency GPS antenna for high-accuracy applications with the GeoXH™ handhelds and ProXH™ receiver Trimble’s Zephyr™ external L1/L2 GPS antenna contains advanced technology for extremely low multipath, outstanding low elevation satellite tracking, and sub-millimeter phase center accuracy. Use the Zephyr antenna together with a GeoXH handheld or GPS Pathfinder® ProXH receiver for high-accuracy mapping and GIS data collection. The Zephyr antenna can be mounted on a range pole, along with the GeoXH handheld or the ProXH receiver and field computer, to give you a convenient all-on-the pole solution. Key features:
Specifications:
13580417781 出售 ILX Lightwave OMM-6810B with OMH-6722 for sell  The OMM-6810B is the only power meter capable of measuring the optical power and wavelength of semiconductor lasers including short wavelength lasers, high power pumps, and fiber lasers. A variety of measurement heads cover wavelength ranges from 350 to 1700nm for power only or power and wavelength measurement. In addition to precision power and wavelength measurements, the OMM-6810B is loaded with standard features such as log/linear display modes, auto ranging, user calibration, and reference measurement capability. All of these features plus an analog output and IEEE-standard GPIB interface combine to make this instrument a cost-effective laser diode development or production test tool. For specifications on the OMH-6810B Power and Wavelength Meter, please refer to the OMH-6810B product brochure.
出售13580417781 Trimble Spectra Precision CR600 Laser Receiver for sell Spectra Precision Laser CR600 for general construction and laser based display systems The Spectra Precision® Laser CR600 Receiver is ideal for contractors doing both site prep and general construction. The CR600 can be either rod or machine mounted, making it ideal for a wide range of applications. Using the magnetic mount, the CR600 receiver is easily moved between backhoes, small excavators, box blades or skid steer loaders. With such a high degree of flexibility, the CR600 needs to be tough enough for any job. Features & Benefits: Designed for tough construction site conditions. Rugged, waterproof, lightweight magnesium housing can withstand a drop of up to 3 m (10 ft) on concrete. Super-bright colored LED elevation indicators visibly indicate grade elevation information to the operator�even in poor light and up to 100 m (350 ft) in bright sunlight. Adjustable bandwidth lets the operator tighten the on-grade band to easily meet a variety of accuracy requirements with tighter tolerances � from rough grading through form leveling. Wraparound receiver cells with continuous pickup through an operating range of 270� provide less dead spots and improved productivity, especially for machine applications. Longer, above-grade receiver cells make digging with a back hoe easier than ever. manual http://trl.trimble.com/docushare/dsweb/Get/Document-236035/User%20Guide%20-%20CR600%20-%20English.pdf gggggggggg
Wednesday, April 28, 2010出售 13580417781 NAT9914BPL replacement for for TI TMS9914A   • Register and pin compatible with TI TMS9914A (40-pin DIP, 44-pin PLCC, and 44-pin QFP versions) • Meets all IEEE 488.2 requirements • Bus-line monitoring • Preferred implementation of requesting service • No messages sent when there are no Listeners • 20 MHz maximum programmable clock rate • Low-power CMOS design with TTL-compatible inputs • Automatic EOS and/or NL message detection • Handles DMA transfers • Programmable data transfer rate with T1 delays of 350 ns, 500 ns, 1.1 μs, and 2 μs • Programmably compatible with GPIB transceivers (TI, National Semiconductor, and Motorola) Overview The National Instruments NAT9914BPD, NAT9914BPL, and NAT9914BPQ are drop-in replacement parts for the Texas Instruments TMS9914A 40-pin DIP, 44-pin PLCC, and 44-pin QFP packages, respectively. The NI NAT9914 is 100 percent register and pin compatible with the 9914 on power-up and has additional features present in the NAT4882 IEEE 488.2 Controller chip. Thus, the NAT9914 can perform all interface functions defined by ANSI/IEEE Standard 488.1-1987 and meets the additional requirements and recommendations of ANSI/IEEE Standard 488.2-1992. The NAT9914 performs complete IEEE 488 Talker, Listener, and Controller functions. The NAT9914 has the complete register set and the identical pin configuration of the TI TMS9914A on power-up, but has complete IEEE 488.2 Controller functionality through software. You can take advantage of IEEE 488.2 with minimal software changes. Although the default clock input is 5 MHz, the NAT9914 can use clock input values up to 20 MHz for increased performance. The NAT9914 can also run in NEC 7210 register-compatible mode with a software command. If you are looking for alternatives to existing TI TMS9914A chip suppliers or planning to upgrade your designs to IEEE 488.2 without hardware changes, you should consider using the NAT9914. Furthermore, because the NAT9914 can accept faster clock inputs, performance increases without substantial firmware changes. General Architecture The NAT9914 manages the IEEE 488 bus. You can program the IEEE 488 bus by writing control words into the appropriate registers. CPU-readable status registers supply operational feedback. The NAT9914 mode determines the function of these registers. On power-up or reset, the NAT9914 registers resemble the TNS9914A register set, with additional registers that supply extra functionality and IEEE 488.2 compatibility. In this mode, the NAT9914 is completely pin-compatible with the TI TMS9914A. If you enable the 7210 mode, the registers resemble those of the NEC μPD7210 set, with additional registers that supply extra functionality and IEEE 488.2 compatibility. This mode is not pin compatible with the NEC μPD7210. -------------------------------- http://sine.ni.com/nips/cds/view/p/lang/en/nid/11153 ----------------- on NI site 18 USD each. ----------- all my items was surplus parts.but new, never used.
Subscribe to:
Posts (Atom)
|
