anritsu cma5 Light Source Optical Power Meter

Anritsu CMA5 L2-35 Singlemode Fiber Optic Light Source CMA 5 L235 5L35

Singlemode 1310nm 1550nm

Anritsu CMA5 - L2-35 Light Source Light Source: The CMA5 Series Light Sources provide an economical and stable laser source for use in point-to-point attenuation measurement. They feature a rugged design, built to withstand the difficult testing environment of fiber optic cable installation and maintenance. The CMA5 L2-35 Light Sources are ideal for testing single-mode fibers as they are offered in a variety of wavelengths to meet testing applications for WDM with 1310/1550 nm wavelength. Specifications: Model/Order No. L2-35 Emitter Type LD Wavelength 1310/1550 �20 nm Output Power �7 dBm (SM fiber) Source Line Width (FWHM) <5 nm="" td=""> Modulation Output CW, 270 Hz, 1 kHz, 2 kHz Stability (8 hours) �0.1 dB (25癈) Connector Type FC, ST, SC (User replaceable) Battery Operation Time 16 h (9 V alkaline battery) Input Power 9 V (9 V alkaline battery) Operating Temperature Range �10� to +50癈 Storage Temperature Range �25� to +60癈 Relative Humidity 0 to 95% (no condensation) Dimensions 75 (W) � 145 (H) � 25 (D) mm (excl. rubber cover) Mass 250 g Laser Safety IEC 60825-1: 2007 CLASS 1 21CFR 1040.10 Excludes deviations caused by conformance to Laser Notice No. 50 dated June 24, 2007 EMC EN61326-1, EN61000-3-2 Anritsu CMA5 Optical Power Meter Click image(s) below to enlarge.   Handheld Optical Power meter Available For Rental or Purchase DESCRIPTION Pocket-sized and rugged design Large LCD display Accurate Easy to use Three-year warranty Dual-way powering system including a 9V battery and an optional power adapter Great for attenuation and power throughput measurements on point-to-point fiber optic links No warm up time Fast response time Auto-zeroing capabilities and tone detection Multiple calibration wavelengths to address all network types: datacom, multimedia, WDM as well as FTTx High input power capacity enables optical amplifier characterization and multimedia/CATV measurements Ideal for testing single-mode and multimode fibers in various types of applications, thanks to multiple wavelength calibration at 850/1300 nm for datacom testing needs, 1310/1550/1625 nm for all WDM testing, as well as 1490 nm for FTTx testing needs http://velcom-t.ru/fulldiscription/AnritsuCMA5_E1500.pdf

ola-15

andrew T-25-NM DC-3Ghz 25w dummy load

symmetrico 58532A GPS L1 Reference Antenna

 

 ELECTRICAL SPECIFICATIONS
Frequency Range (3 dB Bandwidth): 1575.42 MHz ±10 MHz (typical)
Polarization: Right hand circular
Output Impedance: 50 Ω (typical)
Total Gain: >30 dBi (38 dBi typical @ elevation angle 90°)
Out-of-Band Signal Attenuation: 60 dB (typical) at 1575.42 MHz ±50 MHz
Noise Figure: <2 .2="" br="" db="" typical="">VSWR: <2 .5="" br="" typical="">DC Power: 5 VDC ±0.5 VDC, <27 ma="" p="" typical="">

 http://www.symmetricom.com/products/gps-solutions/gps-timing-products-and-accessories/58532A-GPS-L1-Reference-Antenna/

----------------------

This is ONLY the used working gps antenna ONLY 

NO  Mounting hardware come with.

ONLY the gps antenna you will get.

check aboved link for spec

--------------

This is good antenna/ these not available from last 2 years ago(sold 40 psc last time.Now this time only 30 psc/good luck!

 ------------

shipping

us-15-20 days

other where

20-30 days

if not arrived over 35 days ,ask me !Thank you!

Schneider xml-f010d2015

\

rofin 101107062-00168 rofin 101107062 laser module

CSI MBX-3S automatic differential beacon DGPS receiver

http://www.saderet.co.uk/Admin/Manual/m_mbx3.pdf

CSI MBX-3S DGPS

CSI's MBX-3S DGPS Beacon Receiver is used to access free DGPS signals broadcast by the networks of Medium Frequency radiobeacons deployed in many regions throughout the world. The MBX-3S augments a separate GPS receiver with accuracy-improving correction data, resulting in positioning accuracies of one to five meters 95 per cent of the time, depending on the GPS receiver architecture and sophistication.

The MBX-3S is similar to the SBA-1 beacon receiver in that both feature hands-free operation. However, the MBX-3S also features a convenient menu system for advanced receiver configuration and monitoring of operational and performance status. The menu system enables advanced troubleshooting, adjustment of communication parameters, and manual turning of the receiver. The MBX-3S also has a built-in signal splitter designed for use with combination GPS and beacon antennas such as the CDA-3 and the MGL-3. This feature will separate the beacon and GPS signal, enabling a single antenna to be shared by the MBX-3S and an external GPS receiver.

The MBX-3S is a rugged product based upon the CSI Wireless SBX beacon engine that features advanced digital signal processing techniques. This enables the MBX-3S to deliver reliable demodulation of DGPS data from the beacon broadcasts, even in noisy environments. The MBX-3S outputs the resulting data in the industry standard RTCM SC-104 format accepted by differential-ready GPS receivers. To configure and monitor receiver status, the MBX-3S also supports the NMEA 0183 protocol.

STANDARD FEATURES:

·         Dual-channel Coast Guard beacon receiver

·         Supplements GPS systems with free differential

·         corrections, enhancing accuracy

·         Fast signal acquisition

·         Wide input voltage range for a variety of

·         power sources

·         Low power consumption extends battery life

·         Automatic tuning mode for hands-free operation

·         Integrated signal splitter outputs GPS signal from

·         combined GPS /differential antennas

·         Front-panel interface for easy configuration and

·         status monitoring

APPLICATIONS:

·         Survey and Positioning

·         Offshore Survey

·         Dredge Surveying

·         Ports, Harbors