Motorola STLN4096A hight remote oscillator the HP E1938A inside

4 psc,power on ok.promise the HP E1938A ok

AMPH TEI 14949 75-Ohm Triax Termination Twinax TWC-124 RF 2m cable use

TROMPETER TWINAX CABLES						Attenuation Db/100 FT @ Degrees C
Code No	Cable	Impedence	Shield	Max O/D	Dielectric	30 MHz	50 MHz	100 MHz	200 MHz	500 MHz	700 MHz	1 GHz
061	TWC-124-1A	124 Ohms	TC	0.150"	PTFE	1.20	13.20	18.70	26.40	41.70	49.40	59.00
062	TWC-124-2	124 Ohms	TC	0.245"	PTFE	2.80	3.60	5.10	7.20	11.40	49.40	59.00
063	TWC-78-2	78 Ohms	TC	0.242"	PTFE	3.90	5.10	7.50	10.50	16.00	18.60	22.50

CATC merlin mobile bluetooth protocol analyzer

Merlin Mobile Analyzer Bluetooth Protocol Analyzer Merlin Mobile is a flexible PCMCIA version of LeCroy抯 market leading Bluetooth� protocol analyzer system. Featuring the defacto standard CATC Trace display software, Merlin Mobile provides fast interpretation and debug of Bluetooth protocol traffic. Merlin Mobile抯 PCMCIA form factor makes it ideal for use in field applications where laptop configurations allow the user to position the analyzer in any test environment. Merlin Mobile features comprehensive triggering and robust filtering capabilities, enabling you to focus only on relevant data and avoid lengthy and laborious searches through captured data. Key Features CATC Trace Analysis Software System - De-facto industry standard speeds up interpretation and debug of Bluetooth traffic. Extensive Protocol and Profiles Decoding - Automatically decodes: Baseband, HCI, LMP, L2CAP, SDP, TCS, RFCOMM, OBEX, AT commands, HCRP, HDLC, BNEP, HID, AVCTP, AVDTP, Handsfree and PPP (including LCP, CCP, CHAP, NBFCP, NetBIOS), IPv4, IPv6, TCP & UDP. Supports Bluetooth v1.1 � Bluetooth v2.0 support is available in the Merlin II Protocol Analyzer system. Automatically Decodes Encrypted Traffic - Decodes entire piconet without requiring the need to participate in the piconet. Completely Non-Intrusive - Record piconet traffic using one of several non-intrusive recording modes. Automatic Device Listing - Capture and store device information automatically; allows editing of device data including encrypted data for repeatable test benchmarks. Intelligent Reporting - Quickly identify and track errors, abnormalities or time-sensitive conditions (i.e. Hold, Park, SCO, eSCO, AFH and Master/Slave Switch). Sophisticated Viewing - Selectively view Bluetooth protocol layers (from a single layer to all layers). Real-time Viewing & Analysis - View, mark and analyze Bluetooth traffic while recording or monitoring a piconet. Advanced Triggering - Isolate important traffic, specific errors or data patterns. Hardware Filtering - Faster analysis by removing non-essential fields from the trace. Highly Portable - Ideal for use in tight workspaces and easy positioning for optimal antenna placement and data capture. 3 Year Hardware Warranty - Protect your investment with industry leading warranty View and Understand Bluetooth Protocol The highly intuitive CATC Trace™ expert analysis software trains the eye to understand information faster. Packets are shown on separate rows with every field labeled and color coded. Errors are identified and highlighted in red. For more efficient and deeper analysis, users can view Block Transfers at each layer or the actual raw data bits recorded on the line. NOT included the antenna

全新原装邦纳光电传感器 Banner mini-beam sm31rlmhs

Lowrance LMF-200

DISPLAY

	LED

Anritsu MU1500002A optical 10g rx (narrow ) unite for MP1570A

http://www.anritsu.se/files/MP1570A1_EI1200.pdf

Fluke DS3port Plus Handheld Network Analyzer

Fluke DS3port Plus

• Condition: Excellent

• Includes: Wall Charger
• 
  

DS3port^R PLUS；

手持式DS3/ATM网络分析仪

接口:非平衡75同轴连接

显示:21x8文本模式或128 x64图形模式

适用标准

ATM Forum UNI3.1 FCC Part 15-Subpart B Class A ETL 安全性能参照UL 1950的指标

DS3物理层

比特率：44.210Mbps

接收

输入幅值:DSX-MON(36mV最小值)至DSX-HIGH(900mV额定值)

输入阻抗典型值

线路速率:44.736Mbps± 20ppm

功率表:0.1V-3.6V ±20%

传输输出

幅值:0.65V 最小值(有线路补偿),0.85V最小值(无线路补偿)

线路速率:44.736Mbps± 20ppm

线路编码:B3ZS

输出阻抗:75典型值

定时:内部或环路

LOS检测

3.9S期间,接收信号小于36mV

DS3帧

支持DS3帧格式:C-比特帧,M13帧

DS3错误检测

F-比特、线路码抖动、C-比特奇偶性、错误信息段、FEBE、帧丢失、P-比特

PLCP错误检测

PLCP BIP -8、PLCP帧错误、PLCP FEBE

DS3告警检测

LOS，Blue Alarm-Type 1、Blue Alarm-Type 2、FERF

PLCP报警产生

LOS、Blue Alarm-Type1、Blue Alarm-Type2、FERF

PLCP报警产生

PLCP LOF、PLCP yellow

DS3错误产生

线路码抖动、C-比特、FEBE、F-比特、P-比特

PLCP错误产生

PLCP帧比特、PLCP FEBE、PLCP BIP-8

DS3和PLCP误码率测试

全“1”、全“0”、2¹⁵-1PRBS、2²³误-1 PRBS、用户自定义

ATM层

信元映射：DS3负载中的ATM信元、字节定位信元速率调整：通过插入空信元实现

信元定界：按照ITU 1.432描述的HEC机制或PLCP帧

panasonic VIC 100 38dbi gain L1 gps timing antenna

pdf

unused,but because of without protect,with some SCAR  on the surface.

Features
VIC 100

Dimensions (l x w x h)
Ø 90 x h 98.4

Weight (without cable)
195g


Cable length
No cable

Mounting method
Pole for 1.0 - 14 UNS-2
Connectors
N, TNC

Color

White

 
 

Input impedance

50W

Output VSWR
1.5 typ. / 2.5 max.

Bandwidth  ± 3dB
--

Polarisation

Right hand circular

Total gain
30dBi min. / 38dBi typ.
(with 6 m cable)

Azimuth coverage
360°

Elevation coverage
0 to 90°


 
 

Gain characteristics of
 antenna element
 

Gain (at zenith)
3.0dBi typ.

Gain (at 0 degree)
-10dBi min.

Axial ratio
3dB typ.

 
 

Filter characteristics
 

Attenuation typical value
60dB (at ± 50MHz)


Noise figure
1.8dB

 
 

Electrical
 

Power requirements
5V ± 0.5V


Power ronsumption
20mA typ., 27mA max.

 
 

Environmental
 

Operational temperature
-40 to +85°C


Storage temperature
-45 to +90°C
Humidity (below dew point)
40 to 95%RH

Rubidium FE-5650A Rubidium Frequency Standard 10 MHz

FE-5650A Specifications:

• Frequency: 10 MHz
  
  
• Settability: ±1 x10^-11 (range 2 x 10^-9)
  
• Adjustment Range: 3 x 10^-9
  
• Long Term Stability: 4 x 10^-11/month; 2 x 10^-10/year
  
• Short Term Stability Averaging Time (SEC): f/f; 10^0 1.4 x 10^-11; 10^1 4.4 x 10^-12; 10^2 1.4 x 10^-12
  
• Warm-up Time: <4 min. to 5 x 10^-10 @ 25º C; <10 min. to 5 x 10^-10 @ -55º C
  
• Retrace: 1 x 10^-11 when measured at the same temperature, power off <24 hrs.
  
  
• Output Voltage: 0.5 VRMS into 50 Ohm sinewave
  
• Harmonic Distortion: -30 dB
  
• SSB Phase Noise Offset from Signal: 10 MHz Phase Noise (1 Hz BW); 101 Hz 89 dBc; 102 Hz 125 dBc; 103 Hz 145 dBc
  
• Voltage Variation: <1 x 10^-11 for input voltage range
  
• Power Consumption, During Warm-Up: 45 Watts max
  
• Power Consumption, After Warm-Up: 20 Watts max
  

Manufacturer's Page:

FE-5650A Rubidium Atomic Frequency Standard

i have full information on it. software,manual.pinout.it can reprogramme with RS232(range 1hz-20mhz).

with the software,it even become PATTERN generator.

they made in 2006 year 33th weeks.SO NO worry about the life.