Monday, May 25, 2009
COGNEX IN-SIGHT 5500 SERIES READER WITH CAMERA 康耐视(Cognex)机器视觉In-Sight 5400
Cameras
Cognex In-Sight 5400 With PATMAX
Part #: ISS-5400-1000
In-Sight® 5400 Vision Sensor w/PatMax®
16MB flash RAM for firmware & job files
康耐视COGNEX in sight 5400 In-Sight 5400
2 psc available .NOT good physics condition.NO way to test.
sell for parts./No refund NO warranty.
Good luck!
2个 成色垃圾. 不能保证工作.国内客户可以支付宝交易.
坏了 支付宝退款.运费各自搞定!
13580417781
Thursday, May 21, 2009
Pulsar PS2-16-450/8S 2-Way Power Dividers 8-12.4ghz SMA
| 8.0-12.4 Ghz | 0.4 Insertion Loss | 20 | 0.2 | 4.0 | 1.35:1 VSWR | 30 W | PS2-16-450/8S |
现货 10 个
10 psc available
KDI CA-796, 7~12.4GHz, -6dB Directional Coupler 定向耦合器
20 dB and 30dB, coupling values. These units feature high directivity
and low VSWR and are conservatively rated to ensure the most reli-
able service and performance under severe environmental conditions.
The directional couplers shown on this page are unequalled in terms
of size and performance. The volume of these couplers make them
ideally suited for applications involving high density packaging. As evi-
denced by the specifications, no compromise has been made with
electrical performance in order to achieve sub-miniaturization.
7-12.4Ghz
6db
Minimum
Directivity 17db
现货 20个 psc
20 psc available
trimble 38508-00 BOB Beacon-on-a-Belt 2 psc available 现货
The accuracy of differential
GPS not only means that your
databases have better data, it
also makes locating previously
mapped assets in the field
quicker and more accurate
too. With differential GPS,
distinguishing between closely
spaced assets is fast and unambiguous.
Back in the office you'll
save time too. Since the data you
collected was corrected as you
gathered it, you can transfer that
data directly into your GIS
without the delay of a separate
postprocessing step.
Cable-Free Convenience
To complement the convenience
of Trimble's handheld
GeoExplorer® 3 system, the
BoB differential receiver communicates
with that system
automatically—with no cabling
or accessories whatsoever. There's
nothing to connect, nothing to
forget, and nothing to carry on
your back. Your crews will move
faster and incur less downtime
due to snagged or broken cables.
Rugged and Easy to Operate
No matter where your data
collection and update projects
take you, the BoB receiver is
ready to follow. Shockproof and
water-resistant, it will withstand
all the rigors of fieldwork, in any
weather. Right out of the box
the BoB receiver is ready to start
working with your Trimble
GPS/GIS data collection system.
Within seconds of powering on,
it automatically selects the best
beacon and starts transmitting
corrections. If you want to
reconfigure the receiver in the
field an easy-to-use two-button
interface simplifies the process.
Powerful Software
For more extensive configurations
the versatile PC-BoB
office software makes it easy to
exclude beacon stations, define
custom display names for stations,
and configure the initial
tracking mode. All in all, the
BoB receiver is the most convenient
and versatile beacon
receiver we've ever developed.
* Some countries may not allow transmission on
the frequency the BoB receiver uses. BoB
reveivers sold outside the US have the cablefree
option disabled and must be used with a
cable.
Beacon-on-a-Belt (BoB) Receiver
http://trl.trimble.com/docushare/dsweb/Get/Document-7961/BOBRecvrManualv1ENG.pdf
Subscribe to:
Posts (Atom)