contract me

广州新赛格电子城3351 3352, 广东, China
mokia1985@gmail.com . ship worldwide and accept the paypal payment or Bank transfer Guangzhou,GuangDong,China 国内客户 电话联系 13580417781 广州新赛格电子城3351 3352

Saturday, March 14, 2009

symmetricom 58534A gps timing receiver








New in box ,original ,70 set ready to ship next day,on the shelf.

60 USD each.accept paypal, ship worldwide.

mokia1985@gmail.com for more details.




Sunday, March 8, 2009

美国天宝 Trimble Lassen SQ 微型 8 通道 GPS 模块









 Trimble Navigation Limited

Trimble Lassen SQ

Low Power, Micro Sized 8 Channel GPS Receiver

Ideal Solution For Mobile Applications

 
Trimble Lassen SQ GPS Receiver
 
  • 3.3V for battery powered apps
  • Trimble quality at low cost
  • 8-channel operation
  • Operating temp -40° to +85°C
  • Next-generation RF technology
  • 26 mm x 26 mm x 6 mm
  • Sized for portable devices
  • TSIP, TAIP & NMEA support
  • Different antennas available
  • Starter kit available
  • Ultra-low power: 90mW @ 3.3V



Datasheet/Manual:

Trimble Lassen SQ datasheet in PDF formatDatasheet in PDF format
Trimble Lassen SQ manual in PDF formatManual in PDF format

 

Introduction

Trimble's Lassen® SQ module adds complete GPS functionality
to your mobile product in a postage-stamp-sized footprint with ultra-low
power consumption. The module is designed for portable handheld,
battery-powered applications such as cell phones, pagers, PDAs,
digital cameras, and many others.

Using Trimble's breakthrough FirstGPS™ architecture,
the module delivers complete position, velocity and time (PVT) solutions
for use in the host application. The Lassen SQ module uses minimal
power and space and delivers a robust, reliable PVT solution.

The Lassen SQ module is the only stamp-sized GPS product with
the three most popular standard protocols: TSIP (Trimble Standard
Interface Protocol), TAIP (Trimble ASCII Interface Protocol) and
NMEA 0183. The module is enclosed within a metal shield for ease
of handling. The shield acts as a protective case.

FirstGPS Hardware

The FirstGPS architecture consists primarily of two integrated circuits
and FirstGPS firmware. This technology enables the Lassen SQ to achieve
the unique combination of both ultra-low power usage and micro-size
in the same unit.

Hardware

The Lassen SQ module packages this architecture in a tiny form factor,
(approximately 26 mm x 26 mm, including the metal shield). It typically
requires only 110 mW of power (at 3.3 VDC). Total typical power usage,
including the Trimble 3.3 VDC miniature antenna, is =143 mW. The highly
integrated module is a miniature board containing a GPS hardware core
based on Trimble's Colossus RF ASIC and IO-TS digital
signal processor (DSP) design and a 32-bit RISC CPU. The module offers
onboard data storage in flash memory for complete processing capability.

Antennas

The Lassen SQ module is compatible with active, 3.3 VDC antennas.
Three such antennas are available from Trimble and are recommended
for use according to your application:

  • An ultra-compact embedded
    antenna, approximately the same size as the module itself. This antenna
    is unpackaged, for easy integration into mobile applications.
  • A compact, unpackaged antenna slightly larger than the ultra-compact
    model above.
  • A compact, packaged antenna with magnetic mount
    for flexible, movable installation.

Getting started

The Lassen SQ Starter Kit provides everything you need to get started
integrating state-of-the-art GPS capability into your application.

 
 

Specification

Key Features:
  • 8-channel simultaneous operation
  • Ultra-low power consumption: less than 110 mW @ 3.3 V
  • Antenna open and short circuit detection and protection
  • Compact size: 26 mm W x 26 mm L x 6 mm H
  • Supports NMEA 0183, TSIP, TAIP, DGPS protocols
  • Trimble quality at low cost
Performance:
General:

L1 (1575.42 MHz) frequency, C/A code, 8-channel, continuous tracking
receiver, 32 correlators
Do you require a 12 channel receiver? Look at theLassen
iQ
instead.

Update rate:

TSIP @ 1 Hz; NMEA @ 1 HZ, TAIP @ 1 HZ

Accuracy:

Horizontal: <6>

Acquisition:

Hot Start: <14>

Reacquisition:

<2>

Dynamics:

Acceleration: 4g (39.2 m/sec2)
Motional jerk: 20 m/sec3

Operational limits:

Altitude <18000m>

Interface:
Connectors:

I/O: 8-pin (2x4) male header, micro terminal strip ASP 69533-01
or similar
RF: Low-profile coaxial connector H.FL-R-SMT (10), 50 Ohm

Serial Port:

1 serial port (transmit/receive)

PPS:

3.3 V CMOS-compatible, TTL-level pulse
Once per second with the rising edge of the pulse synchronized with
UTC

Protocols:

TSIP @ 9600 baud, 8 Bits
NMEA 0183 v3.0, selectable baud rate 8 Bits
TAIP @ selectable baud rate, 8 Bits

NMEA Messages:

GGA, VTG, GLL, ZDA, GSA, GSV and RMC
Messages selectable by TSIP command; selection stored in flash memory

Electrical:
Prime power:

+3.0 VDC to +3.6 VDC (3.3 V typ.)

Power consumption:

GPS board only: 110 mW @ 3.3 V
With embedded antenna: 143.3 mW @ 3.3 V

Backup power:

+2.5.VDC to +3.6VDC

Ripple Noise:

Max 60 mV, peak-to-peak from 1 Hz to 1 MHz

Antenna Fault Protection:

Short-circuit detection and protection

Interface Characteristics:
Serial ports/1PPS:

CMOS TTL levels

Supported Protocols:

TSIP @ 9600 baud, 8-Odd-1 (configurable)
TAIP @ 4800 baud, 8-None-1 (configurable)
NMEA 0183 v2.1 @ 4800 baud, 8-None-1 (configurable)

NMEA messages:

GGA, VTG, GLL, ZDA, GSV, GSA and RMC
Messages selectable by TSIP command; selection stored in non-volatile
memory

Other:
Dimensions:

3.25" x 1.25" x 0.40" (82.6mm x 31.2mm x 10.2mm)
without connectors

Weight:

0.7 oz. (19.6 g) without optional shield

Connectors:

RF: SMB
I/O: 8-pin (2x4), 0.100” header

ROHS Status:

This product islead free/ROHS compliant.

Saturday, March 7, 2009

Friday, March 6, 2009

Trimble Resolution T timing gps receiver board for sell







-------------

accept paypal 
ship worldwide 

contrac me for more detals

mokia1985@gmail.com

50 + up in stock.
used,full tested.

-----------

Trimble Resolution™ T

Fully Featured, Low Cost, Embedded GPS Timing Receiver

Ideal Solution For Mobile Products, Precise Timing When You Need It

 
Trimble Resolution T GPS Module
 
  • Auto self-survey for timing accuracy
  • Extremely accurate 1-PPS output
  • PPS synchronized to GPS or UTC
  • Cable delay compensation
  • TRAIM assures high PPS
  • Supports 3 V or 5 V Antennas
  • Ideal Motorola FS Encore replacement



Datasheet/Manual:

Trimble Resolution T datasheet in PDF format Datasheet in PDF format
Trimble Resolution T manual in PDF format Manual in PDF format

 

Introduction

Trimble's Resolution™ T GPS Timing Receiver is a significant new development in GPS architecture: the general purpose, DSP-based software GPS timing receiver. The development of Trimble DSP/GPS software was key to this accomplishment.

Precise Timing Where You Need It

The receiver is an all-in-view, 12-channel, parallel-tracking, embeddable GPS receiver designed to provide precise GPS or UTC time and synchronization for many static timing applications. The timing accuracy will provide for your current needs with plenty of headroom for future requirements.

This low-cost, yet highly accurate and reliable receiver allows the system integrator to put precise timing and synchronization into locations where cost or size is a limitation. Rather than sharing time from a single timing source, with the resultant delays and loss of accuracy, you now can have precise time (synchronization) at every location regardless of how isolated or remote.

Features Flexibility with Software

To provide a true software driven GPS timing receiver, the Resolution T receiver uses an off-the-shelf, software programmable, general-purpose, digital signal processor (DSP) in place of the usual custom GPS ASIC. Using a general-purpose DSP allows incremental software improvements to be implemented throughout the product life cycle. This is not possible in custom GPS hardware ASICs, because most features are permanently locked in the hardware design. The Resolution T receiver can be updated easily in the field with new features as they become available. The modular design also allows for both reduced integration time and low implementation risk.

1-PPS within 15 ns

The Resolution T receiver outputs a 1 Pulse-per-second (1 PPS) timing signal accurate to within 15 nanoseconds of GPS or UTC (1 sigma) when using an overdetermined solution in a stationary mode.

3 or 5 Volt Antenna Compatible

The receiver is designed for 3.3 VDC prime power, but provides a separate pin on the I/O connector for powering the antenna with a user-supplied voltage from 3.0 to 5.5 VDC.

Starter Kit

The Resolution T Starter Kit provides everything you need to start integrating the module into your application. The kit includes an active, external 5-VDC Bullet-style antenna, 50 feet of RG-59 cable, and an AC/DC power adapter. The starter kit enclosure includes a mother board that provides serial output, and a serial interface cable. A reference manual and monitor programs are provided on CD-ROM.

 
 

Specification

Performance:
General:

L1 (1575.42 MHz) Frequency, C/A Code, 12-channel, parallel-tracking receiver, DSP-based

Update rate:

TSIP @ 1 Hz; NMEA @ 1 HZ

Accuracy:

Horizontal Position: <6 meters (50%), <9 meters (90%)
Altitude Position: <11 meters (50%), <18 meters (90%)
Velocity: 0.06 m/sec
PPS: within 15 ns to GPS/UTC (1 Sigma)
<5>

Acquisition:

Reacquisition: <2 sec. (90%)
Hot Start: <14 sec (50%), <18 sec (90%)
Warm Start: <41 sec (50%), <45 sec (90%)
Cold Start: <46 sec (50%), <50 sec (90%)
Cold start requires no initialization. Warm start implies last position, time and almanac are saved by backup power. Hot start implies ephemeris also saved. Hot and Warm are shown for comparison purposes and are not used in timing applications.

Sensitivity:

Acquisition –136 dBm
Tracking –141 dBm

Operational (COCOM)
Limits:

Altitude 18,000 m
Velocity 515 m/s
Either limit may be exceeded, but not both

Interface:
Connectors:

I/O: 8-pin (2x4) 2 mm Male Header
RF: Right-angle SMB (SMA optional)

Serial Port:

1 serial port (transmit/receive)

PPS:

3.3 V CMOS-compatible TTL-level pulse, once per second
Rising edge of the pulse synchronized with GPS/UTC

Protocols:

TSIP @ 9600 baud, 8 bits
NMEA 0183 v3.0 @ 4800 baud, 8 bits

NMEA Messages:

GGA, VTG, GLL, ZDA, GSA, GSV and RMC
Messages selectable by TSIP command
Selection stored in flash memory

Technical:
Prime power:

+3.3 VDC ±0.3 VDC

Power consumption:

GPS board only: 350 mW @ 3.3 V

Ripple Noise:

50 mV, peak to peak from 1 Hz to 1 MHz

Antenna Fault Protection:

Short-circuit/open detection and protection

Interface Characteristics:
Operating Temperature:

–40° C to +85° C

Storage Temperature:

–55° C to +105° C

Vibration:

0.008 g2/Hz 5 Hz to 20 Hz
0.05 g2/Hz 20 Hz to 100 Hz
–3 dB/octave 100 Hz to 900 Hz

Operating Humidity:

5% to 95% R.H. non-condensing, at +60° C

Altitude:

–400 to 18,000 m max

Dimensions:

66.3mm L x 32.1mm W x 8.5mm H (2.6"L x 1.3"W x 0.33"H)

Weight:

12.5 grams (0.4 ounce)

ROHS Status:

This product is lead free/ROHS compliant.


Thursday, March 5, 2009

global locate indoor gps receiver









altera unknown adapter with screen



altera PLMG7192-160 adapter for sell







EPM7192E PGA (160-pin)
PLMG7192-160



promice memory emulator for sell








What is PromICE?
Grammar Engine  PromICE began as a memory emulator. By replacing your
target's ROM with its internal RAM memory,  PromICE speeds firmware
testing.  Normally testing new ROM code involves burning an EPROM or
programming a Flash memory, which are time-consuming tasks.  Loading test
code into PromICE emulation memory is fast and convenient.
More than just a memory emulator, PromICE accelerates the debugging process
through a number of features that enhance the capabilities of software-based
debuggers as well as stand-alone debugging.


accept paypal

mokia1985@gmail.com for more detals

http://www.promice.com/support.htm

40 usd.for it