Raymarine S1000 Autopilot Course Computer for sell

S1000 Autopilot Course Computer

• Rugged, compact autopilot "brain" with SmartSteer™ technology
• No compass or rudder reference unit required making for fast and easy installation
• SeaTalk and NMEA 0183 Interfaces for connection to GPS** and instrumentation.

**A SeaTalk or NMEA 0183 compatible GPS receiver (sold separately)is required for autopilot operation.

------------------------------

this is only the main Autopilot Course Computer for sell.NOT all the raymarine s1000 system.

i have no the other accessories to TEST it if working or NOT working,so with 7 days return warranty,if not working,

less shipping fee.

ANY interesting ,please contract me.

--------------------

Steering System Compatibility

The S1000 is intended for use with the following steering systems and steering rams HC5345, HC5347, HC5348, and HC5358 SeaStar steering systems. Systems with HC4600, HC4645, HC4647, HC4648, and HC4658, BayStar steering rams. Systems with Hynautic K6 steering rams. (In some instances, additional fittings, hardware or tools may be required.) Additionally, the S1000 can be adapted to work with many other hydraulic steering systems from manufacturers like Vetus, Uflex or Lecomble & Schmitt. Click here to learn how to fit the S1000 to one of these systems.

The Angler's Copilot

Engineered for the sport fisherman the SmartPilot S1000 is a valuable weapon in the hunt for fish. Delivering optimal trolling speed control, the S1000 automatically steers in figure eight, cloverleaf and zigzag patterns, maximizing coverage of your favorite fishing grounds.

Navigate

Select a waypoint destination on your chartplotter and let the S1000 navigate your course. Both NMEA 0183 and SeaTalk® compatible the S1000 easily interfaces to a long list of fixed mount and handheld GPS devices. The easy-to-read display provides autopilot status and wireless signal strength. An intuitive menu structure makes operation and calibration easy.

SmartSteer™

Raymarine SmartSteer™ technology eliminates the need for remotely mounted rudder feedback and compass sensors assemblies. Thanks to SmartSteer™ technology the S1000 controls the proportional rate of turn relative to vessel speed, ensuring smooth and accurate helm control at both trolling and cruising speeds.

GPS Waypoint Tracking:Using the output of your SeaTalk or NMEA 0183 GPS, the S100 will steer to a single waypoint, or follow an entire route point-to-point.
Circular Orbit: Using a center point from your GPS, command the S1000 to maintain an orbit around your favorite fishing hot-spot.
Cloverleaf: Make repeated passes over a central point. Let the S1000 keep you on station while you hunt for the big ones.
Zig Zag: Fish down a line of bearing with the S1000's zig zag pattern. The random course changes make your bait look more realistic and tempting.

Narda Cellguard CEL8450 Power VSWR Monitor

Narda Cellguard CEL8450 Power VSWR Monitor
功率计

ship worldwide
accept paypal payment./

symmetricom 58534A gps timing receiver

New in box ,original ,70 set ready to ship next day,on the shelf.

60 USD each.accept paypal, ship worldwide.

mokia1985@gmail.com for more details.

美国天宝 Trimble Lassen SQ 微型 8 通道 GPS 模块

 

Trimble Lassen SQ

Low Power, Micro Sized 8 Channel GPS Receiver

Ideal Solution For Mobile Applications

		3.3V for battery powered apps Trimble quality at low cost 8-channel operation Operating temp -40° to +85°C Next-generation RF technology 26 mm x 26 mm x 6 mm Sized for portable devices TSIP, TAIP & NMEA support Different antennas available Starter kit available Ultra-low power: 90mW @ 3.3V Datasheet/Manual: Datasheet in PDF format Manual in PDF format

Introduction Trimble's Lassen® SQ module adds complete GPS functionality to your mobile product in a postage-stamp-sized footprint with ultra-low power consumption. The module is designed for portable handheld, battery-powered applications such as cell phones, pagers, PDAs, digital cameras, and many others. Using Trimble's breakthrough FirstGPS™ architecture, the module delivers complete position, velocity and time (PVT) solutions for use in the host application. The Lassen SQ module uses minimal power and space and delivers a robust, reliable PVT solution. The Lassen SQ module is the only stamp-sized GPS product with the three most popular standard protocols: TSIP (Trimble Standard Interface Protocol), TAIP (Trimble ASCII Interface Protocol) and NMEA 0183. The module is enclosed within a metal shield for ease of handling. The shield acts as a protective case. FirstGPS Hardware The FirstGPS architecture consists primarily of two integrated circuits and FirstGPS firmware. This technology enables the Lassen SQ to achieve the unique combination of both ultra-low power usage and micro-size in the same unit. Hardware The Lassen SQ module packages this architecture in a tiny form factor, (approximately 26 mm x 26 mm, including the metal shield). It typically requires only 110 mW of power (at 3.3 VDC). Total typical power usage, including the Trimble 3.3 VDC miniature antenna, is =143 mW. The highly integrated module is a miniature board containing a GPS hardware core based on Trimble's Colossus RF ASIC and IO-TS digital signal processor (DSP) design and a 32-bit RISC CPU. The module offers onboard data storage in flash memory for complete processing capability. Antennas The Lassen SQ module is compatible with active, 3.3 VDC antennas. Three such antennas are available from Trimble and are recommended for use according to your application: An ultra-compact embedded antenna, approximately the same size as the module itself. This antenna is unpackaged, for easy integration into mobile applications. A compact, unpackaged antenna slightly larger than the ultra-compact model above. A compact, packaged antenna with magnetic mount for flexible, movable installation. Getting started The Lassen SQ Starter Kit provides everything you need to get started integrating state-of-the-art GPS capability into your application.

Specification
Key Features:
8-channel simultaneous operation Ultra-low power consumption: less than 110 mW @ 3.3 V Antenna open and short circuit detection and protection Compact size: 26 mm W x 26 mm L x 6 mm H Supports NMEA 0183, TSIP, TAIP, DGPS protocols Trimble quality at low cost
Performance:
General:	L1 (1575.42 MHz) frequency, C/A code, 8-channel, continuous tracking receiver, 32 correlators Do you require a 12 channel receiver? Look at theLassen iQinstead.
Update rate:	TSIP @ 1 Hz; NMEA @ 1 HZ, TAIP @ 1 HZ
Accuracy:	Horizontal: <6>
Acquisition:	Hot Start: <14>
Reacquisition:	<2>
Dynamics:	Acceleration: 4g (39.2 m/sec2) Motional jerk: 20 m/sec3
Operational limits:	Altitude <18000m>
Interface:
Connectors:	I/O: 8-pin (2x4) male header, micro terminal strip ASP 69533-01 or similar RF: Low-profile coaxial connector H.FL-R-SMT (10), 50 Ohm
Serial Port:	1 serial port (transmit/receive)
PPS:	3.3 V CMOS-compatible, TTL-level pulse Once per second with the rising edge of the pulse synchronized with UTC
Protocols:	TSIP @ 9600 baud, 8 Bits NMEA 0183 v3.0, selectable baud rate 8 Bits TAIP @ selectable baud rate, 8 Bits
NMEA Messages:	GGA, VTG, GLL, ZDA, GSA, GSV and RMC Messages selectable by TSIP command; selection stored in flash memory
Electrical:
Prime power:	+3.0 VDC to +3.6 VDC (3.3 V typ.)
Power consumption:	GPS board only: 110 mW @ 3.3 V With embedded antenna: 143.3 mW @ 3.3 V
Backup power:	+2.5.VDC to +3.6VDC
Ripple Noise:	Max 60 mV, peak-to-peak from 1 Hz to 1 MHz
Antenna Fault Protection:	Short-circuit detection and protection
Interface Characteristics:
Serial ports/1PPS:	CMOS TTL levels
Supported Protocols:	TSIP @ 9600 baud, 8-Odd-1 (configurable) TAIP @ 4800 baud, 8-None-1 (configurable) NMEA 0183 v2.1 @ 4800 baud, 8-None-1 (configurable)
NMEA messages:	GGA, VTG, GLL, ZDA, GSV, GSA and RMC Messages selectable by TSIP command; selection stored in non-volatile memory
Other:
Dimensions:	3.25" x 1.25" x 0.40" (82.6mm x 31.2mm x 10.2mm) without connectors
Weight:	0.7 oz. (19.6 g) without optional shield
Connectors:	RF: SMB I/O: 8-pin (2x4), 0.100” header
ROHS Status:	This product islead free/ROHS compliant.

trimble gps receiver 50699-00 HPN:3550500063 for sell

accept  paypal 

10 usd each

no manual no spec

trimble 48000-00 gps receiver for sell

15 usd each

NO datasheet any spec

trimble 44525-40 gps module use on BMW X5 for sell

accept paypal and ship worldwide

remove from Siemens vod system

50 usd each 

Trimble Resolution T timing gps receiver board for sell

-------------

accept paypal 

ship worldwide 

contrac me for more detals

mokia1985@gmail.com

50 + up in stock.

used,full tested.

-----------

Trimble Resolution™ T Fully Featured, Low Cost, Embedded GPS Timing Receiver Ideal Solution For Mobile Products, Precise Timing When You Need It

		Auto self-survey for timing accuracy Extremely accurate 1-PPS output PPS synchronized to GPS or UTC Cable delay compensation TRAIM assures high PPS Supports 3 V or 5 V Antennas Ideal Motorola FS Encore replacement Datasheet/Manual: Datasheet in PDF format Manual in PDF format

Introduction Trimble's Resolution™ T GPS Timing Receiver is a significant new development in GPS architecture: the general purpose, DSP-based software GPS timing receiver. The development of Trimble DSP/GPS software was key to this accomplishment. Precise Timing Where You Need It The receiver is an all-in-view, 12-channel, parallel-tracking, embeddable GPS receiver designed to provide precise GPS or UTC time and synchronization for many static timing applications. The timing accuracy will provide for your current needs with plenty of headroom for future requirements. This low-cost, yet highly accurate and reliable receiver allows the system integrator to put precise timing and synchronization into locations where cost or size is a limitation. Rather than sharing time from a single timing source, with the resultant delays and loss of accuracy, you now can have precise time (synchronization) at every location regardless of how isolated or remote. Features Flexibility with Software To provide a true software driven GPS timing receiver, the Resolution T receiver uses an off-the-shelf, software programmable, general-purpose, digital signal processor (DSP) in place of the usual custom GPS ASIC. Using a general-purpose DSP allows incremental software improvements to be implemented throughout the product life cycle. This is not possible in custom GPS hardware ASICs, because most features are permanently locked in the hardware design. The Resolution T receiver can be updated easily in the field with new features as they become available. The modular design also allows for both reduced integration time and low implementation risk. 1-PPS within 15 ns The Resolution T receiver outputs a 1 Pulse-per-second (1 PPS) timing signal accurate to within 15 nanoseconds of GPS or UTC (1 sigma) when using an overdetermined solution in a stationary mode. 3 or 5 Volt Antenna Compatible The receiver is designed for 3.3 VDC prime power, but provides a separate pin on the I/O connector for powering the antenna with a user-supplied voltage from 3.0 to 5.5 VDC. Starter Kit The Resolution T Starter Kit provides everything you need to start integrating the module into your application. The kit includes an active, external 5-VDC Bullet-style antenna, 50 feet of RG-59 cable, and an AC/DC power adapter. The starter kit enclosure includes a mother board that provides serial output, and a serial interface cable. A reference manual and monitor programs are provided on CD-ROM.

Specification
Performance:
General:	L1 (1575.42 MHz) Frequency, C/A Code, 12-channel, parallel-tracking receiver, DSP-based
Update rate:	TSIP @ 1 Hz; NMEA @ 1 HZ
Accuracy:	Horizontal Position: <6 meters (50%), <9 meters (90%) Altitude Position: <11 meters (50%), <18 meters (90%) Velocity: 0.06 m/sec PPS: within 15 ns to GPS/UTC (1 Sigma) <5>
Acquisition:	Reacquisition: <2 sec. (90%) Hot Start: <14 sec (50%), <18 sec (90%) Warm Start: <41 sec (50%), <45 sec (90%) Cold Start: <46 sec (50%), <50 sec (90%) Cold start requires no initialization. Warm start implies last position, time and almanac are saved by backup power. Hot start implies ephemeris also saved. Hot and Warm are shown for comparison purposes and are not used in timing applications.
Sensitivity:	Acquisition –136 dBm Tracking –141 dBm
Operational (COCOM) Limits:	Altitude 18,000 m Velocity 515 m/s Either limit may be exceeded, but not both
Interface:
Connectors:	I/O: 8-pin (2x4) 2 mm Male Header RF: Right-angle SMB (SMA optional)
Serial Port:	1 serial port (transmit/receive)
PPS:	3.3 V CMOS-compatible TTL-level pulse, once per second Rising edge of the pulse synchronized with GPS/UTC
Protocols:	TSIP @ 9600 baud, 8 bits NMEA 0183 v3.0 @ 4800 baud, 8 bits
NMEA Messages:	GGA, VTG, GLL, ZDA, GSA, GSV and RMC Messages selectable by TSIP command Selection stored in flash memory
Technical:
Prime power:	+3.3 VDC ±0.3 VDC
Power consumption:	GPS board only: 350 mW @ 3.3 V
Ripple Noise:	50 mV, peak to peak from 1 Hz to 1 MHz
Antenna Fault Protection:	Short-circuit/open detection and protection
Interface Characteristics:
Operating Temperature:	–40° C to +85° C
Storage Temperature:	–55° C to +105° C
Vibration:	0.008 g2/Hz 5 Hz to 20 Hz 0.05 g2/Hz 20 Hz to 100 Hz –3 dB/octave 100 Hz to 900 Hz
Operating Humidity:	5% to 95% R.H. non-condensing, at +60° C
Altitude:	–400 to 18,000 m max
Dimensions:	66.3mm L x 32.1mm W x 8.5mm H (2.6"L x 1.3"W x 0.33"H)
Weight:	12.5 grams (0.4 ounce)
ROHS Status:	This product is lead free/ROHS compliant.

global locate indoor gps receiver